Aluminum Impact Extrusion
Description
Impact V.S. Deep Drawn
Bottom Thickness: Deep-drawn parts are typically limited to a 1:1 wall/bottom thickness. Impact parts have no limit to wall/bottom thickness to be 1:1 Length / width ratio: Deep draws are typically limited to a 2:1 ratio Impacts are typically limited to 8:1 in aluminum and 4:1 in steel in a single operation. Further process can triple this ratio. Material Yield: Material yield in strip stock for deep draw is typically 80% or less. Material yield in impacts is typically over 90%. |
Material: Field: Electronic / Computer / Telecom Automotive/ Motorcycle & Bike Mechanical / Power |
Aluminum Can |
Aluminum Can for Telecom |
Aluminum shell for battery |
Aluminum Impact Extruding Case |
Aluminum Impact Extrusion Part |
Aluminum Impact Extruding Case |
Aluminum Shell |
Aluminum Thin Tube |
Aluminum USB can |